Semi-Automatic Tabletop Medical Autoclave sterilizer

Semi-Automatic Tabletop Medical Autoclave sterilizer
Chat Now
Product Details

Our company, WANRUI, is one of the professional manufacturers and suppliers of semi-automatic tabletop medical autoclave in China. We have a productive factory, welcome to buy or wholesale products from us.

Semi Automatic Tabletop medical Autoclave WR-16B-A-(-P with printer)


1. Please place the sterilization on a plane place, which could adjust the height by adjusting foot pad.

2. Please adopt distilled water to extend the service life.

3. Don't block the heat removal system on the surface of sterilization.

4. Please put the instruments on the tray not touching one another allowing space for steam to pass through.

5. Please empty the used water tank frequently. Usually it need being empty when the clean water in the reservoir is empty.

6. Please ensure the door handle is closed tightly.

7. Never try to open the chamber door if and when the pressure display doesn't show "0.0".

8. Please cut off the power and cool down the autoclave before maintenance.

9. Don't drag the machine while moving.

10.Power connection must be grounded properly.

11.Must be provided enough power. (23L:2300VA/18L:1800VA)

12.While the outside temperature is too low, please pre-heating the machine without instruments for 30 minutes before sterilizing.

Click for more product detail